|
Item
|
Model
|
Descrription
|
|
1
|
New AccuThermo AW 810M RTA
|
AccuThermo
AW 810M is a desktop rapid thermal processor for 5 to 8 inch wafer , which
uses high-intensity, visible radiation to heat single wafer for short
periods at precisely controlled temperatures. These capabilities, combined
with the heating chamber's cold-wall design, superior heating uniformity
advanced temperature control technology and AW 900 new software, provide
significant advantages over conventional furnace processing and
conventional RTP systems.
|
|
2
|
New AccuThermo AW 610 RTP
|
AccuThermo
AW 610 is a desktop rapid thermal processor for 2 to 6 inch wafer, which
uses high-intensity, visible radiation to heat single wafer for short
periods at precisely controlled temperatures. These capabilities, combined
with the heating chamber's cold-wall design, superior heating uniformity
advanced temperature control technology and AW 900 new software, provide
significant advantages over conventional furnace processing and
conventional RTP systems.
|
|
3
|
New AccuThermo AW 410
|
AccuThermo
AW 410 is a desktop rapid thermal processor for 2 to 4 inch wafer ,which
uses high-intensity, visible radiation to heat single wafer for short periods
at precisely controlled temperatures. These capabilities, combined with the
heating chamber's cold-wall design, superior heating uniformity advanced
temperature control technology and AW 900 new software, provide significant
advantages over conventional furnace processing and conventional RTP
systems
|
|
4
|
AG Heatpulse 610
|
AG
Heatpulse 610 is a rapid thermal processor which uses high-intensity,
visible radiation to heat single wafer for short periods at precisely
controlled temperatures. These capabilities, combined with the heating
chamber's cold-wall design, superior heating uniformity, provide
significant advantages over conventional furnace processing and conventional
RTP systems.
|
|
5
|
AG Heatpulse 410
|
AG
Heatpulse 410 is a rapid thermal processor which uses high-intensity,
visible radiation to heat single wafer for short periods at precisely
controlled temperatures. These capabilities, combined with the heating
chamber's cold-wall design, superior heating uniformity, provide
significant advantages over conventional furnace processing and
conventional RTP systems.
|
|
6
|
Peak ALP 5000
|
The tool
for Rapid Thermal Process is Peak ALP 5000 (Peak 8500).The Peak Rapid
Thermal Processor or RTP System heats substrates with its SP35X lamp,which
sits at top the chamber.Gases can be introduced into the process chamber
,and with the vacuum option,the pressure within the process chamber can be
lowered and raised.Wafers are moved into and out of the process chamber by
the system.
|
|
7
|
AG Heatpulse 210
|
AG
Heatpulse 210 is a rapid thermal processor which uses high-intensity,
visible radiation to heat single wafer for short periods at precisely
controlled temperatures. These capabilities, combined with the heating
chamber's cold-wall design, superior heating uniformity, provide
significant advantages over conventional furnace processing and
conventional RTP systems.
|
|
8
|
Graphite susceptor for rapid
thermal annealing of GaAs
|
The
results of experiments performed to evaluate the use of a commercially
available rapid thermal annealer (RTA) with a graphite susceptor for
capless rapid thermal annealing to activate implants in GaAs are reported
in many articles. The interior of the susceptor was easily charged with As
by annealing a sacrificial GaAs wafer.
|
|
9
|
AG 610 AG 410 AG 210 Rapid
Thermal Annealing System's PCBs
|
OVEN-Control;
ZERO-crossing; Timer-Counter;RMS Analog Card;STD Interface Card;
MIO-24-I/O;A/D-D/A
|
|
10
|
Refurbished Matrix 105
|
Matrixis a
Registered Trademark of Matrix Integrated Systems, Inc.Matrix 105 provides
high throughput in a single wafer system capable of handling wide variety
of substrates, including round, square and ranging from 3” up to
6”. By maintaining independent closed-loop system controls, the
system optimizes vital device parameters.
|
|
11
|
Refurbished Gasonics Aura
1000
|
Gasonics
is a Registered Trademark of Novellus Corp.GaSonic Aura 1000 Plasma System
is the microprocessor controlled down-stream, or “ afterglow”
photoresist stripper that will strip the front and backside of a wafer,
typically in less than one minute. The unit is fully automated,
cassette-to-cassette, and is a single-wafer process design.
|
|
12
|
Refurbished Branson IPC 3000
|
The
Branson IPC 3000 is a barrel plasma etcher that uses oxygen to etch organic
films and residues such as photoresist in a process commonly referred to as
"de-scumming." During a normal run for the Branson Barrel Etcher,
the chamber is evacuated to under 0.5 torr pressure.
|
|
13
|
Refurbished GaSonics Aura
2000LL Loadlock Asher
|
Gasonics
is a Registered Trademark of Novellus Corp. Gasonics Aura 2000LL is a
8" Cassette to Cassette ,Single Wafer Downstream Microwave Asher w/
Loadlock with microwave source and a dictated reactor chamber ,8"
Cassette to Cassette ,Single Wafer Asher ,Configured for 4" -8"
wafers,Loadlock with cool-down station for processed wafer Gas box,
|
|
14
|
Refurbished Branson IPC
L3200
|
Branson/IPC
L3200 single wafer downstream stripper,Dual quartz chambers for 100-150mm
wafers( or 150-200mm wafers), cassette to casette operation
|
|
15
|
Refurbished Gasonics Aura
3010
|
Aura
3010.The Aura 3010(Aura3000) is a single-wafer downstream photoresist
asher, delivers high ash rates with low damage, a large process window, and
a choice of process temperatures during the ashing process. The system has
a user friendly menu-driven user interface, and is suitable for automation
via SMIF (Standard Mechanical Interface) or AGV (Automated Guided Vehicle).3”,
4”, 5”, 6” and 8”wafer capability .
|
|
16
|
Refurbished Matrix 10
|
Matrixis a
Registered Trademark of Matrix Integrated Systems, Inc.Matrix 10 provides high
throughput in a single wafer system capable ofhandling wide variety of
substrates, including round, square and ranging from 4” up to
8”.
|
|
17
|
Refurbished Gasonics L3510
|
Gasonics
is a Registered Trademark of Novellus Corp.The Gasonics L3510 is a
versatile downstream photoresist removal system,designed for clean,
damage-free removal of the most difficult resist structures.Utilizing the
production-proven L-Series platform, the L3510 has a wide process window
due to its patented microwave plasma source.Programmable heating and
process controls contribute to the systems’ unparalleled process
flexibility.3”, 4”, 5”, 6” and 8”wafer
capability.
|
|
18
|
TOK OPMA 1250 Plasma Asher
|
TOK OPMA
1250 Plasma Asher;TOKYO OKA
/ TOK OPMA 1250 Plasma Asher.
|
|
19
|
LFE PDS/PDE 301/PDE 504
|
The LFE
PDS/PDE 301 is a barrel plasma etcher that uses oxygen to etch organic
films and residues such as photoresist in a process commonly referred to as
"de-scumming.
|
|
20
|
Genesis Microstar 200C
Plasma Asher
|
Genesis
Microstar 200C Single Wafer Processing System, 8";- Single Wafer
Processing System
|
|
21
|
Drytek Megastrip 6 H.F.
|
Used
DRYTEK MEGASTRIP 6 H.F. Photoresist Stripper. Features a large capacity,
aluminum chamber that processes up to 25 - 8 in. wafers, 50 - 6 in. wafers,
75 - 5 in. wafers, 100 - 3 in. or 4 in. wafers.
|
|
22
|
Gasonics AE 2001
|
AE 2001 is
a single wafer downstream isotropic etch system, designed to etch thin
films such as poly silicon, silicon nitride and CVD oxides.Utilizing the
proven Aura downstream microwave source and a dedicated reactor chamber,
|
|
23
|
Matrix 303 Plasma Etcher
|
Matrixis a
Registered Trademark of Matrix Integrated Systems, Inc.The model 303 is an electro-mechanical
production system used to etch materials such as nitride, oxide
poly-silicon etc. from the surface of silicon or other substrate. Each
wafer is processed individually by means a chemical reaction induced by a
gas plasma.
|
|
24
|
Brand New Tegal 903e
|
Tegal 900
series Plasma/RIE etch System are used by the Semiconductor Industry for
integrated circuit fabrication. The system are used in one part of the
sequence of manufacturing steps that transfer a pattern formed from a layer
of photosensitive material, the photoresist, to a layer that makes up a
permanent part of the final device.
|
|
25
|
Lam 4428 for Plasma Etch
|
Manufacturer:
LAM;Model: 4428;Rainbow Main Frame
|
|
26
|
AutoEtch Lam 490
|
Manufacturer:
LAM Research;Model: Lam 490
|
|
27
|
Lam Rainbow 4520 Oxide Etch
|
Manufacturer:
LAM Research;Model: Rainbow 4520
|
|
28
|
Tel Plasma Etcher 750C
|
Tel Plasma
Etcher 750C,good condition.
|
|
29
|
Tegal 1513e Plasma Etcher
|
Tegal
1513e Plasma Etcher,used,good condition,complete with many spare parts
|
|
30
|
Tegal 803 Plasma Etcher
|
TEGAL
Inline Automatic Plasma Etcher. The Plasma Inline 803 is a fully automatic,
microprocessor-based plasma chemistry etcher designed especially for the
etching of silicon dioxide (Si02) thin film deposited on single crystal or
polysilicon semiconductor wafers. It provides up to four process gases, two
process channels and a clean channel.
|
|
31
|
TOK TSE-306W PLASMA ETCHER
|
TOK
TSE-306W PLASMA ETCHER ,System was in working condition before it was moved
in to warehouse
|
|
32
|
Tegal Table and Gas Cabinet
|
Tegal
Table and Gas Cabinet
|
|
33
|
ELECTROGLAS EG 2001 Prober
|
The 2000 series
wafer probers are controlled and operated through the use of two consoles
(the operator’s console and the monitor console), simple push-button
controls on each indexer (cassette handling platform), and basic camera
illumination controls on the front of the power module.
|
|
34
|
Refurbished EG 1034
|
The
ELECTROGLAS 1034X is designed for operational simplicity and fast wafer
throughput. The unique ELECTROGLAS solid-state high-speed X-Y Positioning
System permits simplified wafer loading and unloading outside the probe
ring area with high-speed travel to and from the load position.
|
|
35
|
Refurbished ELECTROGLAS
HORIZON 4085X
|
Manufacturer:ElectronGlas,Condition:Used
and good condition,Amount: 12 sets
|
|
36
|
EG 2010
|
The ELECTROGLAS
2010 wafer probers are extremely accurate, modularly designed automatic
wafer probers, configured to perform automatic system functions of:
|
|
37
|
Rucker and Kolls Model 260J
Probing Station
|
Rucker and
Kolls Model 260J Probing Station which is designed for critical manual
probing. It incorporates a standard 4" chuck, X-Y positioning, theta
adjustment and dual z-motion control handles (left and right).
|
|
38
|
SIGNATONE S-250 Probe
|
Manfacturer:Signatone.Condition:Used
and Good Condition,complete,working condition.Amount: 1 set,SIGNATONE S-250
WAFER INSPECTION PROBE / MICROMANIPULATOR
|
|
39
|
HP 4062UX
|
The
HP4062UX Semiconductor Process Control System is the high-end system of the
HP4062 Semiconductor Parametric Test System family. The HP4062UX satisfies all
of the requirements of the Integrated Circuit Manufacturers for both
process monitoring and process development.
|
|
40
|
Refurbished HP 4145B
|
HP4145B
Semiconductor Parameter Analyzer
|
|
41
|
Temptronic TP03500/TP3000
|
Manufacturer:Temptronic
Corporation;Model:TP03500,Condition:New;Model :TP3000,Hot chuck,6 inch,New
|
|
42
|
Refurbished MP 2020
|
The
Wentworth MP2020 is a semi-automatic prober of laboratory and industrial
production line to measure PCM parameter, the chuck which used for
different temperature tests can be heated or colded (such as liquid
nitrogen).The electrical engineering controls a microscope, make operation
of left and right(X), front and back(Y) and up and down(Z) in convenience.
Moreover the Z of microscope has two files, so that the operation of shield
only on the constitution with probe card under the microscope of block
plank is convenience.
|
|
43
|
HP 4142B
|
The HP 4142B
Modular DC Source/MonitorOffering a wide measurement range and excellent
sensitivity, the HP 4142B modular dc source/monitor is a system-use dc
measurement instrument especially designed for high-throughput dc
semiconductor testers.
|
|
44
|
HP/Agilent E5250A Low
Leakage Switch Mainframe
|
HP/Agilent
E5250A Low Leakage Switch Mainframe
|
|
45
|
HP/Agilent E5252A
|
For
measuring a sequence of many devices on a test structure, the HP/Agilent
E5252A (or E5250A option 001) crosspoint matrix module option provides the
ideal solution.
|
|
46
|
Keithley 7002 Switch System
|
The Model
7002 Switch System is a 10-slot mainframe that supports up to 400 2-pole
multiplexer channels or 400 matrix crosspoints. The front panel includes a
unique interactive display of channel status for quick programming.Scanning
speeds of up to 165 channels per second are possible with the high density
switch cards.
|
|
47
|
HP 436A
|
HP436A
Power Meter without sensor
|
|
48
|
Keithley 7001 Switch System
|
The Model
7001 is a half-rack, high density, two-slot mainframe that supports the widest
range of signals in the test and measurement industry. DC switching
capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and
optical switch support, make the Model 7001 a versatile production test
tool for a wide array of applications.
|
|
49
|
HP 437B
|
HP437B
Power Meter without sensor
|
|
50
|
HP 4085B
|
The HP 4085B
switching matrix in the HP 4062UX Process Controll System produces a 1 pA,
1 mV switching system capable of 48(96)-pin high-resolution semiconductor
testing.
|
|
51
|
HP 16067A low leakage
fixtrue
|
low
leakage fixtrue, leads cable from HP4085B to prober station,2x24pin
|
|
52
|
HP 16075A relay test adaptor
|
HP16075A
relay test adaptor, calibrator of HP4085B
|
|
53
|
HP 16069A universal low
leakage fixture
|
HP16069 A
universal low leakage fixture, leads cable from HP4085B to prober station
|
|
54
|
HP 16071A universal fixture
|
HP 16071 A
universal fixture, leads cable from HP4085B to prober station
|
|
55
|
HP 16076A
|
HP16076A
system test module, calibrator of HP4085B
|
|
56
|
HP 16077A extention cable fixture
|
HP16077A
extention cable fixture
|
|
57
|
HP 16346B
|
HP 16346B
, system calibration module, calibrator of HP4085B
|
|
58
|
HP 4284A Precision LCR Meter
|
HP/Agilent
4284A Precision LCR Meter(20Hz-10MHz),Utilize state-of-the art measurement
technologies
|
|
59
|
HP 16058A
|
The Model
16058A Test Fixture is designed for use with the HP 4145A/B Semiconductor
Parameter Analyzer.
|
|
60
|
FTG-12
|
FTG-12,It
isnot tested or refurbished.It is sold*AS-IS WHERE IS*.Allwin21accepts no
responsibility or liability for the use and/or functionality of the system
|
|
61
|
in2 Series Manipulators
|
in2 Series
Manipulators For Smaller Test Heads.The Perfect Size for Your Smaller Test
Heads .The stand alone in2 design has been scaled into three product
groups, based on the load that needs to be supported. The column size
(6", 8", 12") reflects the width of the I-Beam used in the
design of the manipulator column
|
|
62
|
Tencor/ KLA-Tencor M-Gage
300
|
Refurbished
Tencor/KLA-Tencor M-Gage 300 without printer.; Non-Contact Wafer Monitor
for Sheet resistance.
|
|
63
|
Hitachi FE-SEM model S-4700
|
A Cold
Field Emission Gun Scanning Electron Microscope (FEGSEM) of
"below-the-lens" design capable of (manufacturer's claims) 1.5 nm
resolution at 15 kV, 12 mm W.D.; and 2.5 nm resolution at 1 k, 2.5 mm W.D.
Magnification ranges from 30X to 500,000X.
|
|
64
|
Hitachi S-4500 SEM Cold
Field Emission SEM System
|
Model:
S-4500 SEM; Field Emission Scanning Electron Microscope (FE-SEM)
|
|
65
|
Hitachi S8840 Scanning
Electron Microscope
|
Manufacturer:
Hitachi;Model:
S8840
|
|
66
|
Hitachi S-8820 CD SEM
|
Model:S-8820
or S-8620
|
|
67
|
LEO FE-SEM model 982
|
The LEO
982 Field emission scanning electron microscope (FE-SEM, Carl Zeiss SMT
Inc. One Corporation Way
Peabody, MA
01960) provides a
means to achieve ultra high resolution images in the secondary emissive
mode.
|
|
68
|
Hitachi FE-SEM model S-4160
|
6 inch
full wafer system for in-process inspection and metrology of photoresist,
e-beam resist, and nanolithographic structures: Semi-clean contamination
level, No Au or Nobel metals allowed. Field emission gun with resolution to
~35 angstoms typical. On-board CD measurement and metrology functions. EDX
Noran Instruments X-Ray Microanalysis system is controlled by a
high-performance workstation with easy-to-use window manager
|
|
69
|
Micrion FIB model M9500
|
The
Micrion 9500 is a highly sophisticated Focused Ion Beam System and is
capable of performing very delicate microsurgery and cross-sectioning.
|
|
70
|
Ultrapointe Laser Imaging
System 1010A
|
KLA Tencor
Ultrapointe Laser Imaging System 1010A
|
|
71
|
Tencor Thin Film Monitor
TF-1
|
Tencor
Thin Film Monitor TF-1,Price:$4,500.00,AS IS,WHERE IS,Advanced Payment.
|
|
72
|
NESLAB HX-300 Chiller
|
NESLAB Air
Cooled Digital Recirculating Chiller. Air Cooled Compressor. Temperature Range: 5 deg. C to 35 deg. C.
Cooling Capacity: 34100 BTU/hr. at 20 deg. C. CP-55 Pump: 10 gpm at 40 psi.
Reservoir Volume: 15 Gal. 440/480V., 3 Ph., 60 Hz. 12.1A
|
|
73
|
STS 310 PECVD
|
STS 310
PECVD (Plasmafab PF310) Deposition System comprises of a Power Supply Console,
the Deposition main frame and the Monitor trolley complete with keyboard.
|
|
74
|
NESLAB HX-300
|
NESLABHX-300Air
Cooled Digital Recirculating Chiller. Air Cooled Compressor. Temperature Range: 5 deg. C to 35 deg. C.
Cooling Capacity: 34100 BTU/hr. at 20 deg. C. CP-55 Pump: 10 gpm at 40 psi.
Reservoir Volume: 15 Gal. 440/480V., 3 Ph., 60 Hz. 12.1A.
|
|
75
|
STS 320 RIE
|
STS 320
RIE(MULTIPLEX RIE) is a manually load-lock batch plasma Etch system,
designed for Research & Development and small scale production. The
wafer platen can accommodate a variety of substrate sizes from 50mm up to
200 mm.
|
|
76
|
Plasma Therm VII 70 Series
|
Manufacturer:Plasma
Therm Inc.Condition:Used,good condition,complete Vintage:12/26/1990
SN:PTI-7698F-(01)
|
|
77
|
STS 320 ICP
|
STS
Multiplex ICP Process Module
|
|
78
|
Flammable Liquid Storage
Cabinet
|
Justrite's
industry-leading product offering includes items specifically designed to
help workers store, transfer, use and dispose of hazardous materials in a
safe and convenient manner. These products can be categorized into several
areas; fire prevention safety products and environmental protection/hazmat
products.
|
|
79
|
Automatic Voltage Regulator
095-1734
|
Staco
Energy Products Co.'s voltage regulators are designed with maximum safety,
ease of installation and efficiency in mind. Each model features a modular
design, front accessibility and an enclosed, indoor, ventilated, drip-proof
enclosure.
|
|
80
|
Automatic Voltage Regulator
095-1678
|
Staco
Energy Products Co.'s voltage regulators are designed with maximum safety,
ease of installation and efficiency in mind. Each model features a modular
design, front accessibility and an enclosed, indoor, ventilated, drip-proof
enclosure.
|
|
81
|
Dynatex DX-III
Scriber/Breaker
|
Dynatex
DX-III Scriber/Breaker
|
|
82
|
WaferDemount AW 750
|
WaferDemount
AW 750,
|
|
83
|
Thermocarbon Dicing Saw 8003
|
The
Thermocarbon ESEC Dicing Saw 8003 is a high performance, multi-processor, fully
programmable, precision wafer dicing saw. Contact sales@allwin21.com for
more information.
|
|
84
|
SV-802 Spin Rinse &
Dryer (SRD) system
|
SV-802
models is a Spin Rinse & Dryer (SRD) system, which is including the
options of Single Chamber (SV-802-1),or Double Chamber (SV-802-2) versions.
|
|
85
|
SV-702 Spin Rinse &
Dryer (SRD) system
|
SV-702 up
to 6" is a Spin Rinse & Dryer (SRD) system, which is including the
options of Single Chamber (SV-702-1),or Double Chamber (SV-702-2) versions.
|
|
86
|
ASD-SH-802 Horizontal Spin
Dry-In / Dry-Out system
|
ASD-SH-802
is a Horizontal Spin Dry-In / Dry-Out system, which can be worked as a
standard lone system or integrated into Wet Bench Processing Stations with Robot
automation interface for carrier handling.
|
|
87
|
Spin Cleaner/Etcher Sass
Four
|
Spin
Cleaner/Etcher/developer:(Semi-Auto Spinner
System),208V,3phase,20A,DI,N2,Exhause drain,pressurized canister
|
|
88
|
Semitool VERTEQ SRD 1600-34
|
(QTY 2)
Semitool VERTEQ SRD 1600-34, 4",2Xbarrels,W/R monitor,120VAC,15A
|
|
89
|
SEMITOOL VERTEQ SRD
|
SEMITOOL
VERTEQ SRD,6 inch wafer
|
|
90
|
Semitool SAT 2060S
|
SEMITOOL
SAT 2060S Polypro and Teflon Acid Etch tool, wrapped, as-is, can be
inspected, 208V / 3 Phase/ 63 Amp.
|
|
91
|
SVG Develop 8126/8136
|
SVG Develop
8126/8136,Used,good condition,complete Vintage:1999 SN:99-05295
|
|
92
|
D-SPIN60A
|
DAINIPPON
60A coater / developer with 10 low temp heaters and 2 high temp heaters. Complete
with all accessories, crated, was working when de-isnstalled, can inspect,
6",Manufacture:Dainippon Screen Mfg. Co.,Ltd.
|
|
93
|
HTG Inc. Crosslink 1000
|
- HTG Inc.
Crosslink 1000 DUV Photoresist Stabilizer
|
|
94
|
Upgrade MRC903A Sputter
System
|
MRC 903A
Sputter System(Manufacturer:MRC) ,ALLWIN21’s AW-MRC903 Controller is
the direct replacement of the original MRC903A Computer System. The
Controller uses 900A systems’ original cables (I, D,E, and F) and
works with existing 900A systems’ Analog boards. It also has the
capability to control up to four MFCs and one external Hi-Vac controller.
|
|
95
|
CHA Sputter MRC-8803-15
|
3KW
Power,Target 15",208VAC,60Hz,50A,CDA 70-160 PSI,H2O 30-55
PSI,3GPM,Turbo Pump HE500,Controller:LH Turboronik NT 4500,GP 280 Gauge
Controller(ion gauge),MKS 270B Pressure signal controller.
|
|
96
|
Technics evaporator
|
Manufacture:Technics,Condition:Used,Price:$3,000.00,AS
IS,WHERE IS,Advanced Payment.
|
|
97
|
Chiller Bay Voltex HS
|
BAY VOLTEX
HT-0350-AC water chiller, digital readout, air cooled, 120v, 1 phase.
|
|
98
|
FTS System-Maxi Cool
|
Chiller,FTS
System-Maxi Cool
|
|
99
|
Used Chiller List
|
We have
many used chiller for sale.
|
|
100
|
NesLab System III blue
|
NesLab
System III blue,$2,900.00,AS IS,WHERE IS,Advanced Payment.
|
|
101
|
Neslab System II
|
The Neslab
System II Liquid to Liquid Heat Exchanger uses building recirculating or
tap water as the secondary cooling medium to remove heat from the cooling
fluid in the closed circulation loop.
|
|
102
|
Neslab System II
|
The Neslab
System II Liquid to Liquid Heat Exchanger uses building recirculating or tap
water as the secondary cooling medium to remove heat from the cooling fluid
in the closed circulation loop.
|
|
103
|
Tek Temp TKD200/5118TL
|
TKD-200/250
Chillers feature CFC-free refrigeration systems with compressor hot
discharge gas bypass. Stability to ±0.5°C is maintained with our
standard temperature controller with digital display of process/setpoint
temperature. If still tighter stability is required, these chillers can be
equipped with our microprocessor-based temperature controller that is
stable to ±0.1°C.
|
|
104
|
SMC INR-341-32A Chiller
|
SMC
INR-341-32A Chiller,$1,900.00,AS IS,WHERE IS,Advanced Payment.
|
|
105
|
FTS Systems RC 312 Chiller
|
FTS
Systems RC 312 Chiller,$3,500.00,AS IS,WHERE IS,Advanced Payment
|
|
106
|
FTS System RC-00037
|
FTS System
RC-00037 chiller,$2,800.00,AS IS,WHERE IS,Advanced Payment
|
|
107
|
Tek Temp R 22 Chiller
|
Tek-Temp
Inc.makes precision temperature control liquid chillers, water chillers and
heating / cooling systems. Our equipment manufacturing abilities include:
chillers for medical cooling, semiconductor coolers, process fluid, precision
liquid cooling, recirculating air cooling, production coolers / chillers
and industrial process systems.
|
|
108
|
Neslab System III Chiller
|
Neslab System
III Chiller,$3,900.00 for TU-9 and $2,500.00 for TU-7,AS IS,WHERE
IS,Advanced Payment.
|
|
109
|
Brand New ACG Series RF
Plasma Generators
|
The ACG
Series low power generators deliver rated output powers from 300 to 1,000
Watts at 13.56 MHz. The broad range of available power options, superior
reliability, and high accuracy over a wide operating regime make the ACG
Series power generators an effective solution for most applications.
|
|
110
|
RF Dummy Load 8890-300
|
The Model
8890-300 TERMALINE Load Resistor is a self-contained high-power 50 ohm
coaxial transmission line termination requiring no outside power source or
additional equipment.
|
|
111
|
RF Dummy Load 8251
|
RF Dummy
Load 8251,$650.00,AS IS,WHERE IS,Advanced Payment.
|
|
112
|
Used RF Power List
|
RF
Generator,See in detail,AS IS,WHERE IS,Advanced Payment
|
|
113
|
Branson/IPC PM-119-500W RF
Generator
|
Branson/IPC
PM-119-500W RF Generator
|
|
114
|
Branson/IPC PM-112-1500W RF
Generator
|
Branson/IPC
PM-112-1500W RF Generator
|
|
115
|
Vacuum Pump
|
Vacuum
Pump,See in detail,AS IS,WHERE IS,Advanced Payment
|
|
116
|
Flopure Gas Cabinet
|
Flopure
Gas Cabinet,$600.00 each
|
|
117
|
Ecosys Gas Cabinet
|
Ecosys Gas
Cabinet,2 sets (N2,Ar,O2,NF3,Si/He) Vintage:8/16/93
|
|
118
|
Praxair Gas Cabinet
|
Praxair
Gas Cabinet,$1,100.00 each
|
|
119
|
Praxair Blue Gas Cabinet
|
Praxair Blue
Gas Cabinet,Price:$600.00 each
|
|
120
|
Air Products Gas Cabinet
|
Air
Products Gas Cabinet,Model:801-4701724 Gas:HBr
|
|
121
|
Vacuum Heating Furnace
|
Vacuum
Heating Furnace,$3,750.00,AS IS,WHERE IS,Advanced Payment.
|
|
122
|
Labline ultra clean 100
Clean room Oven
|
Labline
ultra clean 100 foot mechanical clean room oven with microprocessor
control,good condition.
|
|
123
|
VWR 1310GM Oven
|
VWR 1310GM
oven foot capacity, gravity convection, 240oC maximum temperature, good
condition
|
|
124
|
Lab-line SQUAROID DUO-VAC
Oven
|
Lab-line
SQUAROID DUO-VACOven foot capacity, gravity convection, good condition
|
|
Item
|
Model
|
Descrription
|