|
Products
|
Used Hitachi
S-4700 SEM Cold Field Emission SEM System
A Cold Field Emission Gun Scanning Electron Microscope (FEGSEM) of "below-the-lens"
design capable of (manufacturer's claims) 1.5 nm resolution at 15 kV, 12 mm
W.D.; and 2.5 nm resolution at 1 k, 2.5 mm W.D. Magnification ranges from 30X
to 500,000X. Specimen tilt at 12 mm W.D up to 45 degrees. Electron source is
a cold FE gun producing high brightness (~ 2 X 109 A / cm2/sr) with little
energy spread (0.2 - 0.3 eV). The "below-the-lens" design and large
sample chamber port permits samples as large as 100 mm diameter X 17 mm thick
H. Oil-free vacuum systems pump column and sample exchange. Available image
modes include secondary and backscattered electron images. There are two
secondary electron detectors; one above the objective lens, the other below.
Digital images may be acquired in BMP, TIFF, or JPEG file formats at 640 X
480, 1280 X 960, or 1560 X 1920 pixels
 .
An Emitech cryo stage is available for use with samples prepared in the
Emitech K-1250 Cryopreparation / Cryotransfer System shown below.
Equipment / Accessories
Hitachi S-4700 with a variety of non-cryo sample holders
CryoSEM observation using Emitech Cryo Stage, Model K-1250 Cryopreparation
System, and a variety of sample holders
Backscatter imaging at TV rates and low voltage (threshold 2.5 kV on gold)
with Autrata modified YAG (yttrium aluminum garnet, cerium doped) crystal
Keithly Specimen Current Detector
Applications
High-resolution topographic contrast (Se) and atomic number contrast (BSe)
imaging of biological and non-biological samples in both room temperature and
cryo modes
Applicable to imaging of immunogold labeled individual cells and bacteria
Specifications
Secondary electron image resolution
2.1 nm guaranteed (at 1 kV)
1.5 nm guaranteed (at 15 kV and W.D. 12 mm or X-ray analysis position)
Backscattered electron image resolution (optional)
3.0 nm guaranteed (at 15 kV YAG detector, optional)
Cold finger and specimen exchange chamber as standard. Allowing sample
exchange via airlock without repositioning
Optional integrated EDX system with 30 degree take-off angle
Fully digital imaging, image processing and archiving system
Dual SE detectors for versatile imaging (SE and BSE)
ExB energy filter
The S-4700 FE-SEM combines the versatility of PC control with a novel
electron optical column to give exceptional performance on large and small
specimens. Resolution of 1.5nm at 15kV is guaranteed at the EDX and specimen
exchange position of 12mm working distance!
The S-4700 also offers excellent low kV performance with guaranteed
resolution of 2.1 nm at 1 kV, at a working distance of 1.5mm. Two versions,
Type I and Type II, are available, differing in the specimen stage size. The
S-4700 Type II features a five axis eucentric motorized stage which will
accommodate specimens up to 150 mm in diameter.
Pre-programmed operating modes allow the user to switch from
high-resolution conditions to microanalysis conditions at the click of the
mouse with no change of objective aperture. The fully integrated new ExB
filter opens the door to low voltage, high resolution, backscattered imaging
never before possible on a conventional SEM.
Sample tilt of 45 degrees without change in working distance
Convenient and useful beam shift of +/-15um
Electron optics
Electron gun: Cold field emission electron source
Acc. :Voltage 0.5 ;30 kV (variable at 0.1 kV/step)
Probe current:1 pA ; 2 nA (depends on Acc. voltage)
Magnification: x 20 x 500,000
Objective aperture Heated aperture, 4-openings, selectable and alignable
outside the vacuum
Specimen Size 2" 4" or 6"
Specimen stage Type I ;Type II
*************************************************
We provide high quality, used, 2nd hand, rebuilt and refurbished CD-SEM.
FESEM, SEM, and FIB.(SEM Image Digitizer System.Schottky Field Emission
Filaments for CD-SEM equipment).
SEM:
- Zeiss/Leo DSM982 FE SEM
- Hitachi S-4500 - FE SEM, Type I and
Type II
- Hitachi S-4700 - FE SEM, Type II
- Hitachi S-4800 - FE
SEM, Type II
- Zeiss/Leo 435VP - W
SEM, variable pressure JSM-6401F
- JSM-6330F
- JSM6300
- JSM6400
- SEIKOI SMI 8100
- SEIKOI SMI 8300
- Hitachi S-806C
CD/SEM:
FIB:
- FEI/Micrion M9100
Workstation, Gas box optional
- FEI/Micrion M9500 Workstation,
Gas box optional
- Seiko 8300 FIB
- Seiko 8100 FIB
Our equipment is fully reconditioned to meet or exceed OEM
specifications and carried out by the qualified engineers with many years of
experience working for OEM.
We provide:
-Complete turn key solutions including installation worldwide.
-Modifying and re-engineering equipment to meet specific customer
applications.
-Operation, maintenance, and applications training.
-Warranty service for our equipment.
|