|
Used
HP 4062UX
Manufacturer:HP
Refurbished by:Allwin21 Corp
The HP4062UX Semiconductor Process Control System is the high-end system
of the HP4062 Semiconductor Parametric Test System family. The HP4062UX
satisfies all of the requirements of the Integrated Circuit Manufacturers for
both process monitoring and process development. Since the HP4062UX uses the
same measurement hardware as the HP4062C, it maintains the same highly
accurate and reliable measurement capabilities as the HP4062C, such as
high-speed measurements over a wide measurement range. For example, a typical
connect-connect-force-measure sequence (resistance) measurement takes less
than 17 ms, and measurements can range from 20 fA to lA and 4 µV to 200V.
In addition to the sophisticated hardware of the HP4062C, the HP4062UX
provides powerful software capabilities with the HP BASIC/UX operating
environment. HP BASIC/UX combines the most powerful instrument control
language. HP BASIC, with all the elements of HP-UX, the Hewlett-Packard
implementation of the AT&T System V UNIX* operating system. HP Interactive
Measurement and Analysis (IMA) Software makes measurements interactively by
providing a softpanel user interface.
HP4062UX Process Control System Key Features:
High-speed and wide measurement range
Standard networking
Interactive Measurement and Analysis Software
Multiuser and multitasking
Multiwindowing
Offline debugger
HP4062UX Process Control System Specification:
Measurement functions:
I, V, I- V, C•G - V, C•G- t, Pulse I/V, Pulse I-V, Analog Search
Switching matrix – Number of pins (to I DUT):
12 pins to 48 pins (48-pin matrix)
24 pins to 96 pins (96-pin matrix)
Number of ports (to instrument): 9 ports (optionally 17) High-resolution
source/monitor unit: 1 port
High-power source/ monitor unit: 1 port
Source/monitor units: 2 ports
Ground unit: 1 port optionally 10
Auxiliary: 4 ports
Maximum voltage at each port:
±200V (SMU ports
±100V (aux. ports)
Maximum current through port to pins:
±1.6A (GNDU port)
±1A (SMU port)
HP4062UX Process Control System include the
following:
1 Main frames for HP4062 UX 1
2 Main frames for HP4142B 1
3 HP 41420A Source/Monitor Unit (SMU) 1
4 HP 41421B Source/Monitor Unit (SMU) 3
5 HP 4084B Switching Matrix Controller 1
6 HP 4085B Switching matrix (12-48pin) 1
7 HP series 700i Work station 1
8 HP4284(Optional) 1
9 HP Universal Low Leakage Fixture 1
We can provide the following refurbished sub-module separately.
* HP4085B Switching matrix
* HP 4084B Switching Matrix Controller
* HP 41421B Source/Monitor Unit
We can also provide the following e- test used equipment.
·Temptronic TP03500
·Rucker and Kolls Model 260J Probing Station
·Refurbished ELECTROGLAS HORIZON 4085X
·SIGNATONE S-250 Probe
·Refurbished EG 1034
·Refurbished EG 2001
·Refurbished MP 2020
·Refurbished HP 4145B
·Refurbished HP 4062
·Refurbished HP 4155
·AW PCM/IC
Software
|